Effect of interlayer slipping on the geometric, thermal and adsorption properties of 2D covalent organic frameworks: a comprehensive review based on computational modelling studies.

Two-dimensional covalent organic frameworks (2D-COFs) are a class of crystalline porous organic polymers, consisting of 2D-planar sheets stacked together perpendicularly via noncovalent forces. Since their discovery, 2D-COFs have attracted extensive attention for optoelectronic and adsorption applications. Owing to the layer stacking nature of 2D COFs, various new slipped structures that are energetically favourable can be designed. These interlayer slipped structures are actively responsible for tuning (mostly enhancing) the optoelectronic properties, thermal properties, and mechanical strength of 2D COFs. This review summarizes the effect of interlayer slipping on the energetic stability, electronic behaviour and gas adsorption properties of 2D layered COFs, which is explained through computational modelling simulations. Since computational modelling offers a deep insight into electronic behaviour at the atomic scale, which is potentially impossible through experimental techniques, the introduction and role of computational techniques in such studies have also been described.

Exploring the Sensing Potential of g-C3N4 versus Li/g-C3N4 Nanoflakes toward Hazardous Organic Volatiles: A DFT Simulation Study.

Ab initio calculations were performed to determine the sensing behavior of g-C3N4 and Li metal-doped g-C3N4 (Li/g-C3N4) quantum dots toward toxic compounds acetamide (AA), benzamide (BA), and their thio-analogues, namely, thioacetamide (TAA) and thiobenzamide (TAA). For optimization and interaction energies, the ωB97XD/6-31G(d,p) level of theory was used. Interaction energies (Eint) illustrate the high thermodynamic stabilities of the designed complexes due to the presence of the noncovalent interactions. The presence of electrostatic forces in some complexes is also observed. The observed trend of Eint in g-C3N4 complexes was BA > TAA > AA > TBA, while in Li/g-C3N4, the trend was BA > AA > TBA > TAA. The electronic properties were studied by frontier molecular orbital (FMO) and natural bond orbital analyses. According to FMO, lithium metal doping greatly enhanced the conductivity of the complexes by generating new HOMOs near the Fermi level. A significant amount of charge transfer was also observed in complexes, reflecting the increase in charge conductivity. NCI and QTAIM analyses evidenced the presence of significant noncovalent dispersion and electrostatic forces in Li/g-C3N4 and respective complexes. Charge decomposition analysis gave an idea of the transfer of charge density between quantum dots and analytes. Finally, TD-DFT explained the optical behavior of the reported complexes. The findings of this study suggested that both bare g-C3N4 and Li/g-C3N4 can effectively be used as atmospheric sensors having excellent adsorbing properties toward toxic analytes.

Frequency-dependent nonlinear optical response and refractive index investigation of lactone-derived thermochromic compounds.

Nonlinear optical (NLO) switchable materials play a crucial role in the fields of electronics and optoelectronics. The selection of an appropriate switching approach is vital in designing such materials to enhance their NLO response. Among various approaches, thermos-switching materials have shown a 4-fold increase in NLO response compared to other photo-switching materials. In this study, we computationally investigated the geometric, electronic, and nonlinear optical properties of reversible lactone-based thermochromic compounds using the ωB97XD/6-311+G (d,p) level of theory. Molecular orbital studies are employed to analyze the electronic properties of the close and open isomers of these compounds, while time-dependent density functional theory (TD-DFT) analysis is utilized to evaluate their molecular absorption. Our findings reveal that the π-electronic conjugation-induced delocalization significantly influences the ON-OFF switchable nonlinear optical response of the lactone-based thermochromic compounds. Notably, among all compounds, the open isomer of lactone 2 exhibits the highest hyperpolarizability value (6596.69 au). Furthermore, we extended our analysis to investigate the frequency-dependent second and third-order hyperpolarizabilities. The most pronounced frequency-dependent NLO response is observed at 532 nm. Additionally, we calculated the refractive index of these thermochromic compounds to further assess their nonlinear optical response. The open isomer of lactone 1 demonstrates the highest refractive index value (3.99 × 10-14 cm2/W). Overall, our study highlights the excellent potential of reversible thermochromic compounds as NLO molecular thermos-switches for future applications.

Unveiling the Potential of B3O3 Nanoflake as Effective Transporter for the Antiviral Drug Favipiravir: Density Functional Theory Analysis.

In this study, for the first time, boron oxide nanoflake is analyzed as drug carrier for favipiravir using computational studies. The thermodynamic stability of the boron oxide and favipiravir justifies the strong interaction between both species. Four orientations are investigated for the interaction between the favipiravir and the B3O3 nanoflake. The Eint of the most stable orientation is -26.98 kcal/mol, whereas the counterpoise-corrected energy is -22.59 kcal/mol. Noncovalent interaction index (NCI) and quantum theory of atoms in molecules (QTAIM) analyses are performed to obtain insights about the behavior and the types of interactions that occur between B3O3 nanoflake and favipiravir. The results indicate the presence of hydrogen bonding between the hydrogen in the favipiravir and the oxygen in the B3O3 nanoflake in the most stable complex (FAV@B3O3-C1). The electronic properties are investigated through frontier molecular orbital analysis, dipole moments and chemical reactivity descriptors. These parameters showed the significant activity of B3O3 for favipiravir. NBO charge analysis transfer illustrated the charge transfer between the two species, and UV-VIS analysis confirmed the electronic excitation. Our work suggested a suitable drug carrier system for the antiviral drug favipiravir, which can be considered by the experimentalist for better drug delivery systems.

Enhanced nonlinear optical response of alkalides based on stacked Janus all-cis-1,2,3,4,5,6-hexafluorocyclohexane.

Significant efforts are continuously exerted by the scientific community to explore new strategies to design materials with high nonlinear optical responses. An effective approach is to design alkalides based on Janus molecules. Herein, we present a new approach to remarkably boost the NLO response of alkalides by stacking the Janus molecules. Alkalides based on stacked Janus molecule, M-n-M' (where n = 2 & 3 while M and M' are Li/Na/K) are studied for structural, energetic, electrical, and nonlinear optical properties. The thermodynamic stability of the designed complexes is confirmed by the energetic stabilities, which range between -14.07 and -28.77 kcal/mol. The alkalide character of alkali metals-doped complexes is confirmed by the NBO charge transfer and HOMO(s) densities. The HOMO densities are located on the doped alkali metal atoms, indicating their alkalide character. The absorptions in UV-Vis and near IR region confirm the deep ultraviolet transparency of the designed complexes. The maximum first static and dynamic hyperpolarizabilities of 5.13 × 107 and 6.6 × 106 au (at 1339 nm) confirm their high NLO response, especially for K-2-M' complexes. The NLO response of alkalides based on stacked Janus molecules is 1-2 orders of magnitude higher than the alkalide based on Janus monomer. The high values of dc-Kerr and electric field-induced response e.g., max ∼107 and 108 au, respectively have been obtained. These findings suggest that our designed complexes envision a new insight into the rational design of stable high NLO performance materials.

Hierarchical covalent organic framework-foam for multi-enzyme tandem catalysis.

Covalent organic frameworks (COFs) are ideal host matrices for biomolecule immobilization and biocatalysis due to their high porosity, various functionalities, and structural robustness. However, the porosity of COFs is limited to the micropore dimension, which restricts the immobilization of enzymes with large volumes and obstructs substrate flow during enzyme catalysis. A hierarchical 3D nanostructure possessing micro-, meso-, and macroporosity could be a beneficial host matrix for such enzyme catalysis. In this study, we employed an in situ CO2 gas effervescence technique to induce disordered macropores in the ordered 2D COF nanostructure, synthesizing hierarchical TpAzo COF-foam. The resulting TpAzo foam matrix facilitates the immobilization of multiple enzymes with higher immobilization efficiency (approximately 1.5 to 4-fold) than the COF. The immobilized cellulolytic enzymes, namely ß-glucosidase (BGL), cellobiohydrolase (CBH), and endoglucanase (EG), remain active inside the TpAzo foam. The immobilized BGL exhibited activity in organic solvents and stability at room temperature (25 °C). The enzyme-immobilized TpAzo foam exhibited significant activity towards the hydrolysis of p-nitrophenyl-ß-d-glucopyranoside (BGL@TpAzo-foam: Km and Vmax = 23.5 ± 3.5 mM and 497.7 ± 28.0 µM min-1) and carboxymethylcellulose (CBH@TpAzo-foam: Km and Vmax = 18.3 ± 4.0 mg mL-1 and 85.2 ± 9.6 µM min-1 and EG@TpAzo-foam: Km and Vmax = 13.2 ± 2.0 mg mL-1 and 102.2 ± 7.1 µM min-1). Subsequently, the multi-enzyme immobilized TpAzo foams were utilized to perform a one-pot tandem conversion from carboxymethylcellulose (CMC) to glucose with high recyclability (10 cycles). This work opens up the possibility of synthesizing enzymes immobilized in TpAzo foam for tandem catalysis.

Therapeutic potential of oxo-triarylmethyl (oxTAM) as a targeted drug delivery system for nitrosourea and fluorouracil anticancer drugs; A first principles insight.

In this study, oxygenated triarylmethyl (oxTAM) is investigated by DFT calculations as a drug carrier framework for Nitrosourea (NU) and Fluorouracil (FU) drugs. Based on the adsorption analysis i.e., energies and distances between interacting atoms, it is found that oxTAM exhibits excellent carrier abilities for the delivery of FU (-1.53 eV & 2.00 Å) and NU (-1.33 eV & 2.12 Å) drugs. NCI and QTAIM results indicate the presence of hydrogen bonding in drug-carrier complexes. The values of dipole moment and global chemical descriptors show the significant reactivity of oxTAM for NU and FU drugs. Based on electronic property analysis, FU@oxTAM has a higher adsorption trend for complexation with oxTAM as compared to NU@oxTAM. Moreover, FU can easily release from the carrier due to the decreasing adsorption stability after protonation under an acidic environment as well as a short recovery time observed for the oxTAM carrier surface. Keeping in view all the above parameters, we inferred that oxTAM can serve as a potential drug delivery system for anticancer drugs including, Nitrosourea and Fluorouracil drugs.

Ab initio study for superior sensitivity of graphyne nanoflake towards nitrogen halides over ammonia.

Graphyne (GYN) has received immense attention in gas adsorption applications due to its large surface area. The adsorption of toxic ammonia and nitrogen halides gaseous molecules on graphyne has been theoretically studied at ωB97XD/6-31 + G(d, p) level of DFT. The counterpoise corrected interaction energies of NH3, NF3, NCl3, and NBr3 molecules with GYN are - 4.73, - 2.27, - 5.22, and - 7.19 kcal mol-1, respectively. Symmetry-adapted perturbation theory (SAPT0) and noncovalent interaction index (NCI) reveal that the noncovalent interaction between analytes and GYN is dominated by dispersion forces. The significant change in electronic behavior, i.e., energies of HOMO and LUMO orbitals and NBO charge transfer correspond to the pronounced sensitivity of GYN towards considered analytes, especially NBr3. Finally, TD-DFT calculation reveals a decrease in electronic transition energies and shifting of adsorption to a longer wavelength. The recovery time for NX3@GYN is observed in nanoseconds, which is many orders of magnitude smaller than the reported systems. The recovery time is further decreased with increasing temperature, indicating that the GYN benefits from a short recovery time as a chemical sensor.

Potential sensing of toxic chemical warfare agents (CWAs) by twisted nanographenes: A first principle approach.

The toxic chemical warfare agents (CWAs) are extremely harmful to the living organisms. Their efficient detection and removal in a limited time span are essential for the human health and environmental security. Twisted nanographenes have great applications in the fields of energy storage and optoelectronics, but their use as sensors is rarely described. Therefore, we have explored the sensitivity and selectivity of twisted nanographene analogues (C32H16, C64H32) towards selected toxic CWAs, including phosgene, thiophosgene and formaldehyde. The interaction between CWAs and twisted nanographenes is mainly interpreted by considering the optimized geometries, adsorption energies, natural bond orbital (NBO), frontier molecular orbital (FMO), non-covalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. The structural geometries show that the central octagon of twisted nanographenes is the most favorable site of interaction. The interaction energies reveal the physisorption of selected CWAs on tNGs surface. The average energy gap change (%EH-La) and % sensitivity are quantitatively determined to evaluate the sensing capability of the twisted nanographenes. Among the selected CWAs molecules, the sensitivity of tNG analogues (C32H16 and C64H32) is superior towards thiophosgene (ThP), which is revealed by the high interaction energies of -8.19 and - 12.17 kcal/mol, respectively. This theoretical study will help experimentalists to devise novel sensors based on twisted nanographenes for the detection of toxic CWAs which may also work efficiently under the humid conditions.

Nano-porous C4N as a toxic pesticide's scavenger: A quantum chemical approach.

The sensing affinity of C4N is the most fascinating topic of research due to its excellent chemical and electronic properties. Moreover, owing to the highly active porous cavity, C4N can easily accommodate foreign molecules. Herein, we studied the adsorption properties of carbamate insecticides (CMs) namely, Dimetalin (DMT), Carbanolate (CBT), Isolan (ISO) and Propoxur (PRO) using density functional theory calculations. All the results are calculated at widely accepted ωB97XD functional along with 6-31G(d, p) basis set. The calculated counterpoise corrected interaction energy of the reported complexes ranges between -20.05 and -27.04 kcal/mol, however, the interaction distances are found to be higher than 2.00 Å. The values of interacting parameters depict that the carbamate molecules are physisorbed via noncovalent interactions that can easily be reversible. Moreover, the binding of selected insecticides notably changes the electronic structure of C4N. The electronic changes are characterized by the energies of HOMO & LUMO, their energy gaps and CHELPG charge transfer. The charge density difference between C4N surface and carbamate pesticides are characterized by EDD and CDA analysis. Moreover, the ab initio molecular dynamic study reveals that the complexes are stable even at 500 K. The photochemical sensing properties of C4N are estimated by time dependent UV-Vis calculations. The high sensitivity of C4N towards considered analytes enable it to act as a promising sensor for toxic pesticides.

Electrochemical sensing behavior of graphdiyne nanoflake towards uric acid: a quantum chemical approach.

Though the gas sensing applications of graphdiyne have widely reported; however, the biosensing utility of graphdiyne needs to be explored. This study deals with the sensitivity of graphdiyne nanoflake (GDY) towards the uric acid (UA) within the density functional framework. The uric acid is allowed to interact with graphdiyne nanoflake from all the possible orientations. Based on these interacting geometries, the complexes are differentiated with naming, i.e., UA1@GDY, UA2@GDY, UA3@GDY, and UA4@GDY (Fig. 1). The essence of interface interactions of UA on GDY is derived by computing geometric, energetic, electronic, and optical properties. The adsorbing affinity of complexes is evaluated at ωB97XD/6-31 + G(d, p) level of theory. The stabilities of the complexes are quantified through the interaction energies (Eint) with reasonable accuracy. The calculated Eint of the UA1@GDY, UA2@GDY, UA3@GDY, and UA4@GDY complexes are - 31.13, - 25.87, - 20.59, and - 16.54 kcal/mol, respectively. In comparison with geometries, it is revealed that the higher stability of complexes is facilitated by π-π stacking. Other energetic analyses including symmetry adopted perturbation theory (SAPT), noncovalent interaction index (NCI), and quantum theory of atoms in molecule (QTAIM) provide the evidence of dominating dispersion energy in stabilizing the resultant complexes. The HOMO-LUMO energies, NBO charge transfer, and UV-vis analysis justify the higher electronic transition in UA1@GDY, plays a role of higher sensitivity of GDY towards the π-stacked geometries over all other possible interaction orientations. The present findings bestow the higher sensitivity of GDY towards uric acid via π-stacking interactions. Fig. 1 Optimized geometries (with interaction distances in Å) of UA@GDY complexes.

Effective adsorption of A-series chemical warfare agents on graphdiyne nanoflake: a DFT study.

Chemical warfare agents (CWAs) are highly poisonous and their presence may cause diverse effects not only on living organisms but also on environment. Therefore, their detection and removal in a short time span is very important. In this regard, here the utility of graphdiyne (GDY) nanoflake is studied theoretically as an electrochemical sensor material for the hazardous CWAs including A-230, A-232, and A-234. Herein, we explain the phenomenon of adsorption of A-series CWAs on GDY nanoflake within the density functional theory (DFT) framework. The characterisation of adsorption is based on optimised geometries, BSSE-corrected energies, SAPT0, RDG, FMO, CHELPG charge transfer, QTAIM and UV-Vis analyses. The calculated counterpoise adsorption energies for reported complexes range from - 13.70 to - 17.19 kcal mol-1. These adsorption energies show that analytes are physiosorbed onto GDY which usually takes place through noncovalent interactions. The noncovalent adsorption of CWAs on GDY is also attributed by the SAPT0, RDG and QTAIM analyses. These properties also reveal that dispersion factors dominate in the complexes among many noncovalent components (exchange, induction, electrostatic, steric and repulsion). In order to estimate the sensitivity of GDY, the %sensitivity and average energy gap variations are quantitatively measured by energies of HOMO and LUMO orbitals. In terms of adsorption affinity of GDY, UV-Vis analysis, CHELPG charge transfer and DOS analyses depict an appreciable response towards these toxic CWAs. Graphical abstract.

Remarkable static and dynamic NLO response of alkali and superalkali doped macrocyclic [hexa-]thiophene complexes; a DFT approach.

In this study, the nonlinear optical (NLO) response of alkali metal atom (Li, Na and K) and their corresponding superalkali (Li3O, Na3O and K3O) doped six membered cyclic thiophene (6CT) has been explored. The optimized geometries of complexes; Li@6CT, Na@6CT, K@6CT, Li3O@6CT, Na3O@6CT and K3O@6CT depict that the superalkalis and alkali metals interact through the active cavity of 6CT. Interaction energies reveal that superalkalis have higher interaction with 6CT than alkali metals. The nonlinear optical (NLO) response of the reported complexes is estimated via both static and dynamic hyperpolarizabilities which are further rationalized by the HOMO-LUMO gap, natural bond orbital (NBO) charge transfer, dipole moment, polarizabilities and ß vec. A remarkably high NLO response is computed for Na3O@6CT among all of the complexes. The static hyperpolarizability of the Na3O@6CT complex is 5 × 104 au along with the highest ß vec value (2.5 × 104 au). High charge transfer (1.53e -) and small E H-L gap (2.96 eV) is responsible for such a large NLO response. For dynamic NLO responses, electro-optic Pockel's effect (EOPE) and second-harmonic generation (SHG) are explored. A very large quadratic nonlinear optical response (3.8 × 10-12 au) is observed for the Na3O@6CT complex. Moreover, the absorption spectrum of the Na3O@6CT complex shows ultra-high transparency in the ultraviolet and visible regions unlike any other of its counterparts.

High sensitivity of graphdiyne nanoflake toward detection of phosgene, thiophosgene and phosogenoxime; a first-principles study.

The sensing properties of 2D carbon materials are well explored for various gaseous analytes, however, the detection of toxic chemicals e.g., phosgene (Ph), thiophosgene (ThP) and phosogenoxime (PhO) are rarely studied. To the best of our literature survey, only a single study is found for the adsorption of phosgene on 2D carbon nanoflake (graphyne). This motivated us to explore the sensitivity of graphdiyne (GDY) nanoflake for the detection of phosgene and couple of its derivatives. Therefore, we have performed a density functional analysis to simulate the comparative interaction between phosgene, thiophosgene and phosogenoxime with graphdiyne nanoflake. The interaction behaviours are estimated by interaction energies, (symmetry adopted perturbation) SAPT0 analysis, (noncovalent interaction index) NCI analysis, molecular orbital analysis, natural bond orbital (NBO) charge transfer and UV-Vis absorption analysis. The obtained results demonstrate the trend in sensitivity of graphdiyne for analytes is PhO@GDY > ThP@GDY > Ph@GDY. The sensible justification for the particular observation is provided by the energy gaps between HOMO and LUMO orbitals in term of %sensitivity. The %sensitivity is in complete accord with the aforementioned trend. In addition, results suggest that graphdiyne based sensor for detecting phosgene and derivatives are better in sensitivity in comparison with already reported graphyne sensor.

Cyclic versus straight chain oligofuran as sensor: A detailed DFT study.

This study presents a novel approach for exploring the sensitivity and selectivity of cyclic oligofuran (5/6/7CF) toward gaseous analytes and their comparison with straight chain analogues (5/6/7SF). The work is not only vital to understand the superior sensitivity but also for rational design of new sensors based on cyclic ring structures of oligofuran. Interaction of cyclic and straight chain oligofuran with NH3, CO, CO2, N2H4, HCN, H2O2, H2S, CH4, CH3OH, SO2, SO3 and H2O analytes is studied via DFT calculation at B3LYP-D3/6-31++G (d, p) level of theory. The sensitivity and selectivity are illustrated by the thermodynamic parameters (Ebind, SAPT0 energies, NCI analysis), electronic properties (H-L gap, percentage of average energy gap, CHELPG charge transfer, DOS spectra), and UV-Vis analysis. All these properties are simulated at B3LYP/6-31G (d) level of theory while UV-Vis is calculated at TD-DFT method. Cyclic oligofurans have high binding energies with analytes compared to 5/6/7SF which corresponds to higher sensitivity of 5/6/7CF. Furthermore, the cyclization of oligofuran significantly improves the sensitivity and selectivity of the system. Alteration in electronic properties of 5/6/7CF and 5/6/7SF is remarkably high upon complexation with SO2 and SO3. Further the stability of rings (5, 6 and 7 membered cyclic oligofurans) and their SO3 complexes is also confirmed by molecular dynamics calculations. The findings of the work clearly suggest that the cyclic geometry enhances not only sensitivity but also selectivity of conducting polymers (oligofuran).

An accurate comparative theoretical study of the interaction of furan, pyrrole, and thiophene with various gaseous analytes.

An accurate comparison of the interaction of furan, pyrrole, and thiophene with different gaseous analytes is vital not only for understanding the sensing mechanism of corresponding polymers but also for rational design of new materials. In the present study, DFT calculations at (M05-2X/Aug-cc-PVDZ) have been performed to investigate the interaction behavior of furan, pyrrole, and thiophene (as models for their corresponding polymers) with different analytes (NH3, CO2, CO, N2H4, HCN, H2O2, H2S, CH4, CH3OH, SO2, SO3, H2O). The interaction of heterocycles with analytes is illustrated by changes in geometric, energetic, and electronic properties. SAPT calculations were performed for energy decomposition analysis to study the contribution of non-covalent components of the total interaction energy for each complex. Analysis of energetic and electronic properties reveals that all heterocycles are highly sensitive to SO3. The results suggest that sensing ability of polypyrrole is higher than polyfuran and polythiophene for all analytes. Graphical abstract SAPT0 energies (kcal mol-1) of furan, pyrrole, and thiophene with various gaseous analytesᅟ.